09-02-2025, 10:42 AM
(This post was last modified: 09-02-2025, 04:59 PM by GrimFinger.)
Formula for Coloring a particular star.
Coordinate = 1880
NOTE: Leave the dash out of the star location (this example is for a star at location 18-80).
Step 1 - Click on Game.
Step 2 - Click on Open Map (CTRL+M).
Step 3 - Select and load the map of your choice.
Step 4 - After map loads, select Map.
Step 5 - Select Show New information.
Step 6 - Select Star symbols.
Step 7 - A box similar to the one below will then appear in GTac.
Step 8 - Select Coordinate
Step 9 - Select =
Step 10 - Type in the two-digit location of the star that you want to change the color of (be sure to manually delete the hypen - thus, star 18-80 would be 1880).
Step 11 - On the right side of that box, select Choose a shape to be drawn, as well as pen color and line type.
Step 12 - Select Brush color and Brush pattern.
Step 13 - Click on the OK button.
Step 14 - You will then end up with a colored star that will look something like this, depending upon the color, size, and shape options that you selected for the star that you wanted to change the color of.
Coordinate = 1880
NOTE: Leave the dash out of the star location (this example is for a star at location 18-80).
Step 1 - Click on Game.
Step 2 - Click on Open Map (CTRL+M).
Step 3 - Select and load the map of your choice.
Step 4 - After map loads, select Map.
Step 5 - Select Show New information.
Step 6 - Select Star symbols.
Step 7 - A box similar to the one below will then appear in GTac.
Step 8 - Select Coordinate
Step 9 - Select =
Step 10 - Type in the two-digit location of the star that you want to change the color of (be sure to manually delete the hypen - thus, star 18-80 would be 1880).
Step 11 - On the right side of that box, select Choose a shape to be drawn, as well as pen color and line type.
Step 12 - Select Brush color and Brush pattern.
Step 13 - Click on the OK button.
Step 14 - You will then end up with a colored star that will look something like this, depending upon the color, size, and shape options that you selected for the star that you wanted to change the color of.